Impact Copolymer
Impact copolymers are produced by the copolymerisation of ethylene with PP Homopolymer during a second reaction stage. This block type copolymerisation results in PP resins with the additional benefit of offering an excellent balance of impact strength and stiffness at both ambient and low temperatures.
With a wide range of melt flows, impact copolymers can be selected to perform in the most exacting applications, from the injection moulding of rigid thin-walled packaging for consumer and industrial segments and the extrusion of energy-saving pipes in construction to the moulding of interior and exterior applications for the automotive industry.
Impact copolymer resins are equally at home at high and low temperatures, so they are suitable for freezer and freezer-to-microwave applications.
Benefits
- Stiffness and impact balance at ambient and low temperature
- Excellent heat and chemical resistance characteristics
- Excellent flow-ability and stiffness to impact ratio allow for moulding parts weight reduction and faster cycle times, leading to higher productivity
| Product | Melt Flow Rate (230°C/2.16 kg, *230°C/5 kg) g/10 min | Density g/cc | Tensile Modulus Mpa | |
|---|---|---|---|---|
| Luban EP2340L | 6 | 0.9 | NA | |
| Luban EP2340P | 15 | 0.9 | 1350 | |
| Luban EP2348R | 21 | 0.9 | 1450 | |
| Luban EP2348S | 35 | 0.90 | 1550 | |
| Luban EP2348T | 48 | 0.90 | 1550 | |
| Luban EP2348UC | 70 | 0.9 | 1450 | |
| Luban EP2380M | 7 | 0.90 | NA |
| Product | Melt Flow Rate (230°C/2.16 kg, *230°C/5 kg) g/10 min | Density g/cc | Tensile Modulus Mpa | |
|---|---|---|---|---|
| Luban EP2340L | 6 | 0.9 | NA | |
| Luban EP2340P | 15 | 0.9 | 1350 | |
| Luban EP2348R | 21 | 0.9 | 1450 | |
| Luban EP2348S | 35 | 0.90 | 1550 | |
| Luban EP2348T | 48 | 0.90 | 1550 | |
| Luban EP2348UC | 70 | 0.9 | 1450 | |
| Luban EP2380M | 7 | 0.90 | NA |
This website has been developed for information purposes only.
The products mentioned on this website are representative of the products offered for sale by OQ and have been indexed according to customary industry applications.
In listing products on this website, OQ in no way states or implies that the products have been tested as safe or effective for all potential applications or that OQ currently holds the regulatory permits or approvals required for any specific customer use or application in all countries. The customer is solely responsible for ensuring that each product is suitable for customer’s intended use and that all regulatory approvals are obtained in every applicable jurisdiction for such use.
Any technical advice, recommendations or services provided by OQ have been developed in good faith but may not cover all scenarios and are intended for use only by persons having skill and experience in the handling of chemicals. OQ assumes no responsibility, and customer hereby waives and releases OQ from all claims arising from reliance on any of the information presented on this website.